|
NEW:
KNX Gateway for motorcontrollers.
| |
Product examples & references
This site has some product examples, of what we have
developed together with our customers. The controllers is be able to fulfill other requirements, than they are developed for. Please
contact us for further discussion of your application requests.
Type MCU-8201A LowCost MCU, 24VDC, 1A
The controller is supplied in a DIN rail mounting box and operates 1 venetian
blind, with the functionality UP, DOWN, STOP, TILT UP and TILT DOWN. The
controller has position and speed regulation, and more controllers can be
connected in individual groups and has "all-controll" option. Any number of controllers can be connected together.
Supply voltage 10-30VDC.
Download flyer for MCU8201A
Type KNX9190 KNX Gateway for our Venetian Blind
controllers, both MCU9206 and MCU9201
The controller is supplied in a DIN rail mounting box and operates up to 16
groups of venetian
blinds individually, with the functionality UP, DOWN, STOP, TILT UP and TILT
DOWN. Any number of controllers can be connected together via
RS485 databus and can operate any number of blinds, which again can be
programmed to operate individually, in groups etc. Supply voltage 10-30VDC.
Download flyer for
KNX9190
Proportional Hydraulic valve controller, 3-channel + main valve, fully digital, 12-30 VDC
PVC-4080
is a 3-Channel fully digital, high accuracy, Hydraulic proportional valve
controller.
This
means, that the PVC-4080 is able to control 3 sets of valves, each set
consisting of 2 coils. Furthermore it has an extra output which can operate main
or dump valve directly.
Each
channel is completely individual controlled, and all parameters, like ramp-up,
ramp down, limit etc. is configured digital from the on-board display and menu
buttons. For high volume production parameters can be programmed from a PC
program.
Each
valve/channel is operated via an analog input with 0-5 volt signal, where also
supply voltage is available directly at each input. This makes it easy to use
either joystick or potentiometer as control input. Download
product sheet PVC4080A00.pdf
Proportional Hydraulic valve controller,
1-channel + main valve, fully digital, 12-30 VDC
PVC-4081
is a single-channel fully digital, high accuracy, Hydraulic proportional valve
controller.
This
means, that the PVC-4081 is able to control 1 hydraulic proportional valve
consisting of 2 coils. Furthermore it has an extra output which can operate main
or dump valve directly.
All
parameters like ramp-up, ramp down, gain, offset, limit etc. is integrated, and
is configured digitally from the on-board display and menu buttons. For high
volume production parameters can be programmed from a PC program.
The
valve is operated via an analog input with 0-5 volt signal, where also supply
voltage is available directly at the input. This makes it easy to use either
joystick or potentiometer as control input. Download
product sheet PVC4081A00.pdf
Type 9206 Venetian Blind controller, 6 channels 12-24 VDC
The controller is supplied in a DIN rail mounting box and operates 6 venetian
blinds individually. Any number of controllers can be connected together via
RS485 databus and can operate any number of blinds, which again can be
programmed to operate individually, in groups etc. The controller has a lot of
integrated features, like encoder system for each motor which ensures that all
motors/ blinds in a facade is always in the same position. It has low-speed
tilting, overload and fault protection, can operate dual-motor blinds etc. and
works in RS485 mode with our remote control systems. When used in EIB or LON
mode it works with foreign EIB and LON compatible remote control systems.
Different BUS interfaces can be added, so the controller can work with different
standard networks like EIB, LON or RS485/H3. The controller works with 12-24VDC
motors.
Download product
info 9206CT20R01BUK.pdf
Download product info 9206CT22W03AUK.pdf
Type 9201 Venetian Blind Controller, single channel 12-24 VDC
The controller is supplied in a DIN rail mounting box. Any number of controllers
can be connected together via RS485 databus and can operaty any number of
blinds, which again can be programmed to operate individually, in groups etc.
The controller works together with all our remote control systems. The
controller has a lot of integrated features, like encoder system for each motor
which ensures that all motors/ blinds in a facade is always in the same
position. It has low-speed tilting, overload and fault protection, can operate
dual-motor blinds etc. The controller operates via an RS485/H3 databus. The
controller works with 12-24VDC motors.
Download product info 9201MT22W01UK.pdf
Type 9146 Infrared remote control receiver, 30 groups of blinds + all
Description will be added soon.
Type 3600, Timer Control System, works individual on single or group of blinds
with weekdays
TCS3600 is an logic control unit for the venetian blind controllers, which can easily be programmed by the houseowner or administrator, to operate the blinds by time and weekday, individually or by groups.
Only one TCS3600 is neccessary for the whole building.
As an option the unit can contain a GSM modem, so the blinds cab be operated from your cellphone by sending an SMS to the
unit.
Download product sheet 3600UK.pdf
Download manual 3600MUK.pdf
Power supply, 24VDC/1,3 amp Part No. 7020
Description will be added soon.
Power supply, 24VDC/2,1 amp Part No. 7021
Description will be added soon.
Power supply, 24VDC/3,2 amp Part No. 7022
Description will be added soon.
Power supply, 24VDC/5 amp Part No. 7023
Description will be added soon.
Power supply, 24VDC/10 amp Part No. 7024
Description will be added soon.
Power supply, 24VDC/20 amp Part No. 7025
Description will be added soon.
Cable with female connector, 3 gages Part no. 8410
Description will be added soon.
Connector in venetian blind corner part, 3 gages Part no. 8440
Description will be added soon.
Plastic box, complete, Part no. 8380
Description will be added soon.
| |
|
